What to do if my ACCO Brands Laminator is on but won't run?
If your ACCO Brands Laminator is powered on but not running, the feed table switch might not be fully closed, preventing the safety switch from activating. Make sure that the heat shield and feed table are completely closed.
Why doesn't my ACCO Brands Ultima 35 turn on when I press the power button?
If pressing the standby power button on your ACCO Brands Laminator doesn't turn the machine on, it could be due to the power cord not being fully inserted into the outlet. Fully insert the plug into the outlet and ensure the outlet has power.
General| Brand | ACCO Brands |
|---|---|
| Model | Ultima 35 |
| Category | Laminator |
| Language | English |
Explanation of hazard symbols and safety alert symbols used in the manual.
Warning regarding the high temperature of the laminator's heatshoe.
Warning about keeping body parts away from moving rollers.
Warning about the sharp blade on the film trimmer.
Warnings against attempting self-service and connecting to electrical supply.
Procedures and conditions for servicing the laminator.
Steps for properly placing and connecting the laminator.
Maintenance advice for cleaning the heatshoe and rollers.
Overview of the laminator's main components and their functions.
Description of the main power ON/OFF switch.
Explanation of buttons, lamps, and settings on the control interface.
Details the function of the heat shield for protection.
Description of the table used to position items for lamination.
Information on securing the feed table using its latch.
Instructions for using the guide to align items for lamination.
Description of the components that heat and melt the film adhesive.
Explanation of the bars that guide film to the heat shoes.
Description of the rollers that compress the heated film.
Explanation of the rollers at the back that pull the film through.
Description of the mechanism used to cut laminated film.
Details on how film rolls are loaded and identified.
Warning to avoid touching hot heat shoes during operation.
Warning regarding the sharp blade of the film cutter.
Advice for optimal lamination results and avoiding damage.
Instructions on how to resolve film wrap-ups or jams.
To Next Page
