The devices have four observation modes of the thermal imager: Forest (observation mode of
objects within low thermal contrast conditions), Rocks (observation mode of objects within
high thermal contrast conditions), Identification (high detalization mode), User (individual
brightness and contrast settings).
1.
Press and hold the Menu (3) button to enter the menu.
2.
Select the Mode option with the UP (2)/DOWN (5) buttons.
3.
A short press of the Menu (3) button opens the menu.
4.
Select one of the settings described below with the UP (2)/DOWN (5) buttons.
5.
A short press of the Menu (3) button confirms the selection.
Forest– This is the best mode when searching and observing within field conditions,
against the background of leaves, bushes and grass. The mode is highly informative about an
object being observed as well as landscape details.
Rocks– This is the best mode when observing objects after a sunny day or within urban
To Next Page
Loading...