Accolade 2 LRF Pro - Page 52

This menu option allows you to set up your device for operation in a Wi-Fi network.
1.
Press and hold down the Menu (3) button to enter the main menu.
2.
Select the Wi-Fi Settings
Image not found or type unknown
menu option with the UP (2)/DOWN (5) buttons.
3.
Press briefly the Menu (3) button to enter submenu.
4.
Select the desired menu item with the UP (2)/DOWN (5) buttons.
Password Setup
This menu option allows you to set a password to access your binoculars from an external
device.
The password is used to connect an external device (i.e. smartphone) to your thermal imager.
1.
Press briefly the Menu (3) button to enter the Password Setup submenu.