PROPRIETARY AND CONFIDENTIAL
© 2021 by Acconeer
To complete a successful installation of Acconeer EVK, the following HW
components will be required:
Preparing the HW Installation
3
Connector Board
Raspberry Pi3*
Radar Sensor Board
* Not provided by Acconeerexcept flex cable
** Raspberry Pi original Power Supply is recommended
Additionally*:
• SD Card
• SD Card Holder
• USB Keyboard
• USB Mouse
• Flex Cable, 1 per XR112
• Power Supply for Raspberry Pi**
• Monitor with HDMI cable
XC112
+
+
To Next Page
Loading...