The Accsoon CineEye 2S is a wireless video transmission system designed for professional monitoring applications. It offers high-quality video and audio transmission with very low latency, making it suitable for demanding production environments.
Function Description
The CineEye 2S functions as a wireless video transmitter that takes SDI or HDMI input from a camera and transmits it over a 5GHz WiFi network to multiple mobile devices (up to 4 receivers). This allows for professional monitoring using a dedicated app on iOS and Android devices. It also supports camera control functionalities.
Important Technical Specifications
- Wireless Transmission: 5GHz WiFi
- Transmission Range: Up to 500ft (with no obstacles or interference)
- Latency: Very low, less than 0.06 seconds (excluding camera latency)
- Video Inputs: SDI In and HDMI In
- Video Input Formats:
- 1080p: 23.98/24/25/29.97/30/50/59.94/60fps
- 1080i: 50/59.94/60fps
- 720p: 50/59.94/60fps
- 480p: 59.94/60fps
- Audio Transmission: High quality, 44.1KHz/48KHz 16bit/24bit PCM
- Display: 1.3 inch OLED
- Transmission Power: 17~20dBm
- Power Supply: DC and battery (NP-F970/F750/F550) supported
- Power Consumption: 3.5 Watt (Typical)
- Operating Temperature: -10~40℃
- Dimensions: 108mm × 68.5mm × 30mm (Antenna not included)
- Weight: 213g
- App Compatibility: iOS 8.0 or above / Android 7.0 or above
Usage Features
Installation:
- Unfold the antennas on the CineEye 2S.
- Attach the CineEye 2S to the camera or camera cage using the hot/cold shoe mount adapter.
- Power the device using an NP-F series battery (NP-F970/F750/F550) or a DC power source.
- Connect the camera's SDI or HDMI output to the corresponding input port on the CineEye 2S.
Power On/Off:
- To turn on: Hold the power button for 1 second.
- To turn off: Hold the power button for 2 seconds.
OLED Display:
The 1.3-inch OLED display provides crucial information:
- Input video information (e.g., FHD1080p60 H.265).
- Input audio information (e.g., Hifi44.1k 16bit AAC).
- Battery level or DC input status.
- Connection status, indicating the number of connected devices (displays "0" if no devices are connected).
- Current 5G WiFi channel.
Data Rate Setting:
Users can select from three data rate modes to optimize transmission quality or speed:
- High Quality Mode (HG): Prioritizes video quality.
- Normal Mode (NOM): Default setting, balancing quality and speed.
- Speed Mode (SPD): Prioritizes transmission speed.
To change the setting, press the "Menu" button, navigate to "Data Rate Setting," select the desired mode, and press "Menu" again to apply.
Channel Setting:
The CineEye 2S defaults to "Auto" channel selection, which automatically chooses the channel with the least interference upon power-on.
For manual channel selection:
- Press the "Menu" button to enter the "Channel Setting" menu.
- Select a desired channel from the available options (e.g., 36, 40, 44, etc.).
- Press "Menu" to confirm.
- Choose "Yes" and press "Menu" again to reboot the transmitter, applying the new channel setting.
App Monitoring:
- Download the "Accsoon Go" app from the Google Play Store (for Android) or iOS App Store.
- Launch the "Accsoon Go" app and select "CineEye 2S."
- On your mobile device, open the WLAN (Wireless/WiFi) settings.
- Connect to the CineEye 2S WiFi network. The network name will be "CineEye2_XXXX" (where XXXX is a unique identifier), and the default password is "12345678."
- Return to the "Accsoon Go" app, ensure "CineEye 2S" is selected, and click "Monitor" to view the live camera feed.
Camera Control:
The CineEye 2S supports camera control, allowing users to manage certain camera functions through the monitoring app.
Maintenance Features
Firmware Update:
The CineEye 2S firmware can be upgraded via the "Accsoon Go" app:
- Ensure your mobile phone has internet access.
- Launch "Accsoon Go," select "CineEye 2S," and click "Firmware Update." The app will automatically check for and download the latest firmware if available.
- After the download, connect your mobile device to the CineEye 2S WiFi.
- Go back to the app and click "Firmware Update" to initiate the update process.
Important Update Notes:
- The CineEye 2S battery level must be above 50% before updating.
- Do not turn off the CineEye 2S until the update is complete.
Network Reset:
Users can reset the WiFi SSID and password to factory settings:
- Press the "Menu" button to enter the "Network Reset" menu.
- Select "Yes" and press "Menu" to confirm.
- Choose "Yes" again and press "Menu" to reboot the transmitter. The 5G WiFi SSID and password will be reset to their factory defaults.
Troubleshooting (Q&A):
- No video displayed:
- Verify the video cable is securely plugged into the "SDI IN" or "HDMI IN" port of the CineEye 2S.
- Check if the camera's output format is compatible with the CineEye 2S input formats.
- Ensure the camera's video output is enabled via the SDI or HDMI port.
- Video is choppy:
- Make sure the antennas are fully unfolded.
- Ensure there are no cables or obstructions around the antenna.
- Try switching to another channel manually.
- Mobile devices can't see the CineEye 2S WiFi:
- Check if your mobile device supports 5G WiFi.
Warranty Information:
- Warranty Period:
- Complimentary maintenance or replacement within 15 days of receipt for quality problems.
- One-year warranty for transmitter and receiver units (free repair service under normal use).
- Three-month warranty for accessories and cables.
- Warranty Exclusions:
- Unauthorized maintenance, misuse, impact damage, liquid infiltration, or modification.
- Incorrect use of the product or altering the label and warranty sticker.
- Expired warranty period.
- Damage due to fire, flood disaster, lighting, etc.
- Warranty Process:
- Contact the local dealer for problem resolution.
- If no local dealer is available, contact Accsoon directly via email (support@accsoon.com) or their website (www.accsoon.com). Accsoon reserves the right to review damaged products.
Need help?
To Next Page
General
