Accsoon SeeMo 4K - Faq; Safety Information

14 15
② Damage caused by use or maintenance is not
following the requirements of the product manual.
③ Unauthorized repair, modication or disassembly.
④ Damage caused by force majeure such as re, ood,
lightning strike, etc.
FAQ
2.No image
1.The product won't power on
① Check the NP-F battery level.
② Check if there is any problem with the battery holder. (If
there is, please contact Accsoon ocial personnel for repair).
① Check if the USB-C cable is properly connected to
the SeeMo 4K's VIDEO OUT port.
② Please conrm that the video format output from the
camera is compatible with the SeeMo 4K.
SeeMo 4K supports HDMI video input at:
2160P 30/29.97/25/24/23.98 fps
1080P 60/59.94/50/30/29.97/25/24/23.98 fps
720p 60/59.94/50 fps
③ If there is still no image after the above operation,
please try another iPhone/iPad. (If the image can't be
displayed normally either, please contact the ocial
personnel for repair and after-sale service).
Safety Information
·When operating this equipment, read and follow all the
instructions in this manual.
·Use only accessories/batteries/chargers specied or
recommended by Accsoon.
·Do not expose to moisture, excessive heat or re.
·Keep away from water and other liquids.
·Keep the equipment properly during lightning storms or
when unused for long periods of time.
·Please do not use the product in a place overheating,
under cooling or with lots of moisture, or nearby strong
magnetic devices.
·To reduce the risk of re or electric shock, refer
servicing to qualied service personnel.