Stopping the pump
The pump can be stopped with the STOP function. This stops all basal and bolus insulin
delivery
and should be used to stop delivery of an incorrect bolus while it is being delivered,
or if following hypo rules. When the pump is resumed, the basal insulin will automatically
restart. As long as the pump is in STOP mode, it will beep every minute to remind you that
no insulin is being delivered.
To suspend all insulin delivery
To resume all resume insulin delivery
Extra information: Warnings and errors
The pump has an audible alarm that will sound continuously until dealt with. If an alarm
sounds, the pump screen will display a message, as will the handset via pump mode. This
can be silenced by pressing twice.
To Next Page
Loading...
Need help?
General
