3434
10.7 Fault mode10.7 Fault mode
The LCD display in fault is shown in the following diagram. TheThe LCD display in fault is shown in the following diagram. The
information about the utility power, the battery, the UPS output and theinformation about the utility power, the battery, the UPS output and the
load could be displayed. The symbol “MODE” not be shown and theload could be displayed. The symbol “MODE” not be shown and the
symbol “FAULsymbol “FAULT” is T” is shown instead shown instead in code in code displaydisplay..
Warning mode (Fan Error)Warning mode (Fan Error)
Fault mode (Bus Fault)Fault mode (Bus Fault)
To Next Page
Loading...