To Next PageTo Next Page
Need help?Do you have a question about the Accusonic 8510+ series and is the answer not in the manual?
General| Measurement Range (Sound) | 30 dB to 130 dB |
|---|---|
| Resolution | 0.1 dB |
| Power Source (Sound) | 9V battery |
| Measurement Principle | Sound Pressure Level (SPL) |
| Operating Temperature | 0°C to 40°C |
| Microphone Type | 1/2 inch Electret Condenser |
| Weighting | A, C |
| Time Weighting | Fast, Slow |
| Display | LCD |
| Power Supply | 9V battery |
| Humidity | 10% to 90% RH |
Covers physical, electrical, and power wiring for installation.
Guides on transducer wiring, checkout, and connecting sensors.
Describes using the LCD display for setup and navigating menus.
Covers system, section, path, and level input parameter settings.
Details analog output, relay, and system setting configurations.
Introduction to the Windows software and PC connection setup.
