AccuTools BluFlame - Analysis and Calculation

21
11.4 ANALYSIS AND CALCULATION
VARIABLES MEASURED
CONTINUOUSLY
UNIT
O
2
[ % ]
Air Temp. (Thermocouple) [ °F ]
Flue Gas Temp. (Thermocouple) [ °F ]
CO [ ppm ]
Draft [ psi ]
CONTINUOUS CONVERSIONS TO CO CO NO
[ ppm ] Related to 0% Remaining
O
2
(Undiluted)
X X
[ ppm ] Relative to Fuel-Dependent
O
2
Reference Value
X X
[ mg/m
3
] X X
[ mg/kWh ] X X
[ mg/MJ ] X X
[ mg/m
3
] Relative to Fuel-
Dependent O
2
Reference Value
X X
ADDITIONAL CONTINUOUSLY
CALCULATED VARIABLES
UNIT
CO
2
[ % ]
ETA [ % ]
ETA, Condensed [ % ]
Loss [ % ]
Loss, Condensed [ % ]
Lambda -
Dew Point [ °F ]
CO/CO
2
Ratio [ % ]