Ace UDD-24-48-HC User Manual

14 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

USER MANUAL

Commercial Kegerator

(Beer Dispenser)

Models: UDD-24-48-HC / UDD-24-60-HC / UDD-24-72-HC

PLEASE READ THE MANUAL THOROUGHLY PRIOR TO

EQUIPMENT INSTALLATION, OPERATION AND MAINTENANCE!

Table of Contents

Questions and Answers:

D
Danny JacksonAug 11, 2025
Why does my Ace Kegerator condensing unit run for long periods of time?
- C
  Cameron JohnsonAug 11, 2025
  If the condensing unit in your Ace Kegerator runs for extended periods, several factors could be the cause. First, ensure you haven't placed an excessive amount of warm product in the cabinet, and allow sufficient time for cooling. Check that the doors are closed properly and not left open for too long. Inspect the door gaskets to confirm they are fully snapped in and sealing correctly. A dirty condenser coil can also cause this issue, so clean it. Additionally, check if the evaporator coil is iced over; if so, unplug the unit to allow it to defrost. Finally, verify that the thermostat isn't set too cold.
J
James MortonAug 18, 2025
What to do if my Ace Kegerator cabinet temperature is too warm?
- C
  Chase LeeAug 19, 2025
  If the cabinet temperature of your Ace Kegerator is too warm, try the following steps: Begin by checking the thermostat and setting it to a lower temperature. Avoid blocking airflow inside the cabinet. If you've recently loaded the kegerator with a large amount of warm product, give it time to cool down. Also, verify that a fuse hasn't blown or a circuit breaker hasn't tripped, and replace the fuse or reset the breaker if necessary. Clean the condenser coil, and make sure that the door isn't open for too long and is properly closed. Note that an ice-covered evaporator coil may also cause this issue.

Ace UDD-24-48-HC Specifications

General

Brand	Ace
Model	UDD-24-48-HC
Category	Kegerators
Language	English