5
F.1.13 Fine tune the gain G and R for x=283 , y=297
( x=299, y=315 for 7500; x=313, y=329, for 6500 ) ± 2
F.1.14 Check 150 >Y> 130 cd/mm, if not , adjust G to get Y>130 cd/mm, then repeat item 2.5.12
F.1.15 Change pattern to fall white, adjust SB to get 92< Y <113 cd/mm .
F.1.16 Select 7500 and 6500 color coordinate separately. Repeat item 2.5.11 ~ 2.5.15 to meet
specificity.
7500 X=300 Y=315
6500 X=313 Y=329
To Next Page
Loading...
