6
• For optimal viewing it is recommended to look at the full face of the
monitor, then adjust the monitor’s angle to your own preference.
• Hold the stand so you do not topple the monitor when you change the
monitor’s angle.
Figure 2
NOTES
• Do not touch the LCD screen when you change the angle. It may cause
damage or break the LCD screen.
• Careful attention is required not to catch your fingers or hands when you
change the angle.
ADJUSTING THE VIEWING ANGLE
• You can adjust the angle of the monitor from -5° to 15°, but please notice that
the rear obliquity of the monitor must not be over 15° when you adjust it,
otherwise the machine may be inclined.
To Next Page
Loading...
