EasyManua.ls Logo

Acer Android All-in-One - User Manual

Acer Android All-in-One
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
English
Acer Android All-in-One Quick Start Guide
Important safety instructions
Please read the following instructions carefully.
1. To clean the Android All-in-One screen:
• Turn off the Android All-in-One and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the Android All-in-One near a window. Exposing the Android All-in-One to rain, moisture or sunlight can
severely damage it.
3. Do not apply pressure to the screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing
of any nature.
5. Store the Android All-in-One in a room with a temperature of -20° to 60°C (-4° to 140°F). Storing the Android All-
in-One outside this range may result in permanent damage.
6. Immediately unplug your Android All-in-One and call an authorized technician if any of the following circumstances
occur:
• Android All-in-One-to-PC signal cable is frayed or damaged.
• Liquid spills onto the Android All-in-One or the Android All-in-One is exposed to rain.
• The Android All-in-One or case is damaged.
Package contents
Please refer to the User Guide for information about setting up your Android All-in-One.
Turning on for the rst time
You will asked some questions before you can use your monitor as a Android All-in-One. To set up or access a Google
account, connect your Android All-in-One to an Ethernet or Wi-Fi access point.
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's power
cord.
2. Connect the signal cable to the DP (optional) and/or HDMI
(optional) input socket of the monitor, and the DP
and/or
HDMI
(optional) output socket of the graphics card on the
computer.
Then tighten the thumbscrews on the signal cable
connector.
3.
4.
Insert Android All-in-One power cable into the power port at
the back of the Android All-in-One.
Plug the power cords of your computer and your
Android All-in-One into a nearby electrical outlet.
Manufacture: Chicony Electronics Co., LTD.
Model: A11-120P1A&A10-090P3A
Manufacture:
Model: ADP-90MD BB
Android All-
in-One
Power cord
HDMI cable
(optional)
USB cable
(optional)
AC Adapter
Quick start
guide
DP cable
(optional)
DELTA ELECTRONICS, INC.
User guide
HDMIDP
USB
USB
USB3.0 port
HDMI
DP
Question and Answer IconNeed help?

Do you have a question about the Acer Android All-in-One and is the answer not in the manual?

Summary

Key Safety Instructions

Package Contents

Lists all items included in the product packaging, such as cables and adapters.

Initial Setup and First-Time Use

Guides users through the initial setup process and first-time operation of the Android All-in-One.

Connecting Monitor to Computer

External Control Buttons

Regulatory Notices

EU Waste Disposal Guidelines

European Union Compliance

FCC Compliance Statement

Industry Canada Statement

Safety and Comfort

General Safety Precautions

Provides essential safety instructions to read and follow for safe operation.

Cleaning Your Monitor

Details the correct method for cleaning the monitor screen and cabinet safely.

Device Power Connection

Outlines proper procedures for connecting and disconnecting the device's power supply.

Power Outlet Accessibility

Ensures power outlets are easily accessible for the equipment operator's convenience.

Safe Listening Guidelines

Offers advice on listening at safe volumes to protect hearing from damage.

Product Usage Warnings

Highlights critical warnings regarding product placement, ventilation, and potential hazards.

Electrical Power Usage

Acer Android All-in-One Specifications

General IconGeneral
Display Size21.5 inches
Display Resolution1920 x 1080 pixels
TouchscreenYes
RAM2 GB
Internal Storage16 GB
Operating SystemAndroid
Wireless802.11b/g/n
BluetoothBluetooth 4.0
PortsUSB, HDMI