Chapter 2 17
Main
Use the Main menu to set the system time and date, and other basic options.
Parameter Description Format/Options
System Time Displays the system time. The time is expressed in a 24-hour
format.
HH:MM:SS
(hour:minute:second)
System Date Displays the system date. MM/DD/YYYY
(month/day/year)
Total Memory Displays the size of system memory detected during boot-up.
Video Memory Displays the size of video memory detected during boot-up.
Quiet Boot Enables or disables the Quiet Boot function.
When enabled, BIOS setup is in graphical mode and displays
only the computer brand logo during POST and while booting.
When disabled, BIOS setup is in conventional text mode and
displays the system Summary Screen.
Disabled
Enabled
Network Boot When enabled, a remote host with appropriate boot image can
boot this computer. (only works with an Ethernet device.)
Disabled
Enabled
F12 Boot Menu Enables or disables the Boot menu during POST. Disabled
Enabled
D2D Recovery Enables or disables the D2D Recovery function. This function
allows the user to create a hidden partition on the hard drive to
store the operation system. User can then use this partition to
restore the system to factory defaults by pressing the Alt+F10
keys during system boot-up.
Disabled
Enabled
SATA Mode Select the SATA controller operating mode.
When set to AHCI (Advanced Host Controller Interface), the
SATA controller enables its AHCI and RAID features when the
computer boots up.
When set to IDE, the SATA controller disables its AHCI and
RAID functions when the computer boots up.
Note: If you do not intend to use the AHCI or RAID features
set this parameter to IDE to speed up the boot-up time.
AHCI
IDE
Maintenance and Service Guide,Service Manual,Motherboard Schematics for Laptop/notebook http://faqp.ru/
HTTP://FAQP.RU/ - Схемы, сервис мануалы, инструкции по разборке ноутбука
To Next Page
Loading...
