47 Chapter 2
LCD Auto DIM
When this is selected, brightness of the LCD will be reducted for power savind when adaptor has been
removed from the system.
When this is not selected, brightness of the LCD will remain the same after adaptor has been removed
from the system.
Network Boot
When this is selected, Boot from LAN feature is enabled. When this is not selected, Boot from LAN feature
is then disabled.
Insyde Software SCU May 20, 2003 5:40:09
Main Advanced Security Boot Exit
ʳʳ Date and Time
ԩʳ ʳ Quiet Boot
˲ʳ ʳ LCD Auto DIMʳ˲ ʳ
ԩ Network Boot
ԩF12 Boot Menu
Enable or disable the F12 key for Boot Menu during Post
<Space> for Enable or Disable.
Insyde Software SCU May 20, 2003 5:40:09
Main Advanced Security Boot Exit
ʳʳ Date and Time
ԩʳ ʳ Quiet Boot
˲ʳ ʳ LCD Auto DIMʳ˲
ԩ Network Bootʳ
ԩF12 Boot Menu
Enable or disable auto dim function, <Space> for Enable or Disable.
To Next Page
Loading...
