55 Chapter 2
Exit Discarding Changes
Exit without saving current settings.
Load Setup Default
Load manufacture default settings.
Insyde Software SCU May 20, 2003 5:40:09
Main Advanced Security Boot Exit
Exit Saving Changes
--------------Exit Discarding Changes------------ Exit Discarding Changes
Press <OK> to Exit the SCU. Load Setup Default
The current settings will not be saved!!! Discard Changed
OK Cancel
<Tab> <Right> <Left> for block select. <Up> <Down> for item select.
< Enter> for accept. <Cancel> <Esc> for
reject. <Alt> activates accelerators.
<Space> for Enable or Disable.
Insyde Software SCU May 20, 2003 5:40:09
Main Advanced Security Boot Exit
Exit Saving Changes
----------------Load Setup Default----------------- Exit Discarding Changes
Do you wish to change the current setup Load Setup Default
to the system default values? Discard Changed
OK Cancel
<Tab> <Right> <Left> for block select. <Up> <Down> for item select.
< Enter> for accept. <Cancel> <Esc> for
reject. <Alt> activates accelerators.
<Space> for Enable or Disable.
To Next Page
Loading...
