Chapter 3 93
11. Remove the four screws (G) securing the left and right LCD brackets to remove the brackets.
Removing the Antennas
1. See “Removing the Battery Pack” on page 56.
2. See “Removing the SD dummy card” on page 56.
3. See “Removing the ExpressCard dummy card” on page 57.
4. See “Removing the Lower Cover” on page 57.
5. See “Removing the WLAN Board Modules” on page 60.
6. See “Removing the Keyboard” on page 69.
7. See “Removing the LCD Module” on page 70.
8. See “Removing the LCD Bezel” on page 87.
9. See “Removing the LCD module with the Brackets” on page 88.
10. Release the antenna cables from the aluminium tapes.
11. Remove the tapes holding the antenna cables in place and release the cables from the latches..
Step Size (Quantity) Color Torque
1~4 M2 x L3 (4) Silver 1.6 kgf-cm
To Next Page
Loading...
