59 Chapter 3
Removing the Touchpad Bracket, the Touchpad Board and the Touchpad
1. See “Removing the Battery” on page 50.
2. See “Removing the Middle Cover” on page 53.
3. See “Removing the Keyboard” on page 53.
4. See “Removing the Power Board” on page 58.
5. See “Removing the Upper Case Assembly” on page 58.
6. Pull back the tape covering the touchpad FFC.
7. Disconnect the touchpad FFC the remove it.
8. Remove the four screws securing the touchpad bracket.
9. Slide the touchpad bracket back as shown.
10. Then remove the touchpad bracket.
11. Use a flat headed screw driver to detach the touchpad board.
12. Then detach the touchpad carefully.
To Next Page
Loading...
