Why does my Acer Aspire 3935 Laptop say 'System CMOS checksum bad'?
If your Acer Laptop shows 'System CMOS checksum bad - Default configuration used', it indicates a problem with the RTC battery. You should run the BIOS Setup Utility to reconfigure the system time and then reboot the system.
How to fix real time clock error on Acer Aspire 3935?
If your Acer Laptop shows a 'Real time clock error', this is due to the RTC battery. Use the BIOS Setup Utility to reconfigure the system time, and then reboot the system.
How to fix invalid system configuration data on Acer Aspire 3935 Laptop?
If your Acer Laptop displays 'Invalid System Configuration Data', select 'Load Setup Defaults' in the BIOS Setup Utility’s Exit menu.
What to do if BIOS flash procedure corrupted BIOS code on Acer Aspire 3935?
If your Acer Laptop experiences an interruption during a BIOS flash (such as a power outage) that corrupts the BIOS code, access and execute the boot block program to reboot the computer and recover the regular BIOS code.
How to clear a BIOS password on Acer Aspire 3935?
To clear a BIOS password on your Acer Laptop, short the G26 hardware gap located near the HDD connector to clear the user and supervisor passwords.
Why is there no beep during POST but system runs correctly on Acer Aspire 3935 Laptop?
If there is no beep during POST on your Acer Laptop, but the system runs correctly, check the speaker.
General| Processor | Intel Core 2 Duo |
|---|---|
| RAM | Up to 4 GB DDR3 |
| Screen Resolution | 1366 x 768 |
| Graphics | Intel GMA 4500MHD |
| Wireless | 802.11a/b/g/Draft-N |
| Operating System | Windows Vista Home Premium |
| Weight | 1.9 kg |
| Chipset | Intel GM45 |
| Display | 13.3-inch |
| Optical Drive | DVD Super Multi |
| Battery | 6-cell Li-ion |
| Battery Life | Up to 8 hours |
To Next Page
