Chapter 3 47
Removing the Lower Covers
1. See “Removing the Battery Pack” on page 44.
2. See “Removing the SD dummy card” on page 45.
3. See “Removing the ExpressCard dummy card” on page 46.
4. Remove the three screws from the memory and WLAN bays and loosen the two captive screws on the HDD
cover.
5. Carefully open the memory cover.
Step Size Quantity Screw Type
Memory Cover M2.5*8 (NL) 2
WLAN Cover M2.5*8 (NL) 1
HDD
Cover
Memory
Cover
WLAN
Cover
To Next Page
Loading...
