Chapter 3 54
This chapter contains step-by-step procedures on how to disassemble the notebook for maintenance and
troubleshooting.
To disassemble the computer, you need the tools below:
• Wrist ground strap and conductive mat for preventing electrostatic discharge
• Small Philips screw driver
• Flat head screw driver
• Hexagonal driver
• Tweezers
Note: The screws for the different components vary in size. During the disassembly process, group the
screws with the corresponding components to avoid mismatch when putting back the components. When you
remove the stripe cover, please be careful not to scrape the cover.
Machine Disassembly and Replacement
Chapter 3
To Next Page
Loading...
