62 Chapter 3
Removing the HDD Module/Memory/System Fan/Thermal Module/
CPU/ODD Module and LCD Module
Removing the HDD Module
1. Remove the two screws fastening the HDD door.
2. Detach the HDD door from the notebook.
3. Pull the HDD module outwards to disconnect the HDD module from the main board.
4. Take out the HDD module carefully.
Removing the Memory/System Fan/Thermal Module/CPU
1. Remove the six screws fastening the thermal door. (M2.5*15(NL) for red circle; M2*3(NL) for yellow circle)
2. Detach the thermal door from the notebook.
3. Pop out the memory then remove it
4. Use a tweezer to take out the fan cable as shown.
5. Disconnect the fan cable from the main board.
To Next Page
Loading...
