Acer Aspire ES 14 User Manual

BIOS utility - 43
BIOS UTILITY
The BIOS utility is a hardware configuration program built into your
computer's BIOS.
Your computer is already properly configured and optimized, and you
do not normally need to run this utility. However, if you encounter
configuration problems, you may need to run it.
To activate the BIOS utility, press <Fn> + <2> during the POST while
the computer logo is being displayed.
Boot sequence
To set the boot sequence in the BIOS utility, activate the BIOS utility,
then select Boot from the categories listed on the left of the screen.
Setting passwords
To set a password on boot, activate the BIOS utility, then select
Security from the categories listed on the left of the screen. Find
Password on boot: and use the touchscreen to enter a password
and enable this feature.

Acer Aspire ES 14 Specifications

General

RAM	4GB DDR3L
Display	14-inch HD (1366 x 768)
Operating System	Windows 10 Home
Connectivity	802.11ac Wi-Fi, Bluetooth 4.0
Battery	3-cell Li-ion, 3220 mAh
Ports	USB 2.0, USB 3.0, HDMI, Ethernet, Headphone/Microphone combo jack
Storage	500GB HDD