Machine Maintenance 3-15
Removing the WLAN Module 0
1. Perform the “Removing the Lower Case” procedure described on page 3-9.
2. Perform the “Removing the Battery Pack” procedure described on page 3-10.
3. Unplug the two antenna cables from the WLAN module.
Figure 3-14. WLAN Module Antennas
For reference during machine reassembly, note which cable color
corresponds to the main (black) and auxiliary (white) connectors.
4. Release the antenna cables from the adhesive tapes securing it.
Figure 3-15. Antenna Cables Adhesive Tapes
To Next Page
Loading...
