46 Chapter 3
(2). Pull the card reader board out of the bracket.
12. Remove the front I/O board.
(1). Remove the two screws (D) that secure the I/O board to the bracket.
(2). Pull the I/O board out of the bracket.
NOTE: The card has been highlighted with a yellow circle as above image shows. Please
detach the card and follow local regulations for disposal.
Screw (Quantity) Color Torque Part No.
#6-32 L6 BZN (1) Silver 3.8 to 4.2 kgf-cm 86.00J44.C60
NOTE: The card has been highlighted with a yellow circle as above image shows. Please
detach the card and follow local regulations for disposal.
To Next Page
Loading...
