Acer Chromebook Spin 11 - LCD Module Removal

1-12 Disassembly Procedures
LCD Module Removal 0
Prerequisite:
Battery Pack Removal
1. Disconnect the WLAN antennas from the WLAN module (A) (Figure 1-14).
2. Disconnect the G-sensor cable from the mainboard connector (B) (Figure 1-14).
3. Disconnect the digitizer cable from the mainboard connector (C) (Figure 1-14).
4. Disconnect the eDP cable from the mainboard connector (D) (Figure 1-14).
5. Unthread all cables from the cable guides (Figure 1-14).
Figure 1-14. LCD Module Removal
B
A
B
D
B
C
A