34
English
English
Using 3D glasses (optional)
DLP 3D glasses are powered. In order to enhance battery life, they turn off after a
few minutes of inactivity. Before you can view 3D content, you need to ensure the
glasses are turned on. In many cases, there is a power switch on one of the arms
that you can press, and an LED that indicates if the glasses are turned on or not.
Note: Refer to the documentation that came with your glasses for
instructions how to turn them on and how to change the battery.
Watching 3D DVD content
If you have a DVD player that supports 3D playback, you can watch 3D DVD
contant using your Acer 3D-enabled projector. Connect your DVD player to the
projector using any of the available input formats.
1Press the MENU button on the projector remote control to open the OSD.
2Set 3D to On.
3 Alternatively, press on your projector’s remote control to open Acer e3D
Management. From the 3D options, select On.
Downloaded From projector-manual.com Acer Manuals
To Next Page
Loading...
Need help?
General
