How to troubleshoot no image on Acer Projector?
If no image appears on the Acer Projector screen, ensure the connections are correct and the connector pins aren't bent or broken. Check that the projector lamp is securely installed. Also, remove the lens cap and ensure the projector is switched on.
How to fix Acer GM712/D4K2107 Projector image size?
If the image on your Acer Projector is too small or too large, try these steps: Adjust the zoom ring on the projector lens. Move the projector closer to or further from the screen. Alternatively, press "MENU" on the remote control, go to "Image - -> Aspect Ratio" and try different settings, or press "RATIO" on the remote control to adjust directly.
What to do if Acer GM712/D4K2107 Projector is unresponsive?
If the Acer Projector stops responding to all controls, try turning off the projector. Then, unplug the power cord and wait at least 30 seconds before reconnecting the power.
How to fix Acer GM712/D4K2107 image display issues on PC?
If you're seeing a partial, scrolling, or incorrectly displayed image on your Acer Projector when using a PC (Windows 2000/XP/Vista/Windows 7/Windows 8), open "My Computer", then the "Control Panel", and double-click the "Display" icon. Select the "Settings" tab and ensure your display resolution setting is lower than or equal to WUXGA-RB (1920 x 1200). If the problem persists, change the monitor display and verify that the resolution setting is still lower than or equal to WUXGA-RB (1920 x 1200). Click the "Change" button under the "Monitor" tab, then "Show all devices". Select "Standard monitor types" and choose the resolution mode you need. Ensure the monitor display's resolution is lower than or equal to WUXGA-RB (1920 x 1200).
Why is Acer GM712/D4K2107 Projector not displaying notebook screen?
If the screen of your notebook computer is not displaying your presentation on the Acer Projector, and you are using a Microsoft® Windows® based notebook, note that some notebooks may deactivate their own screens when a second display device is in use. Refer to your computer's manual for reactivation instructions. If you are using an Apple® Mac® OS based notebook, open Display in System Preferences and select Video Mirroring "On".
What to do if Acer GM712/D4K2107 Projector doesn't detect Wifi or Bluetooth?
If the Acer Projector's Wi-Fi or Bluetooth cannot be detected normally, plug in the Wi-Fi dongle again and restart the projector.
What to do if Acer GM712/D4K2107 Projector shows no signal on LAN/WiFi/USB?
If the Acer Projector's LAN/WiFi, USB Display source shows 'No signal', power off the projector and then power it back on.
How to correct slanted image on Acer GM712/D4K2107 Projector?
If the Acer Projector image has slanted sides, try repositioning the projector so it is centered on the screen. You can also press the "Keystone / " button on the remote control until the sides are vertical.
How to stabilize flickering image on Acer GM712/D4K2107 Projector?
If the Acer Projector image is unstable or flickering, adjust the "Tracking". You can also change the display color depth settings on your computer.
How to remove vertical bar on Acer GM712/D4K2107 Projector image?
If the Acer Projector image has a vertical flickering bar, use "Frequency" to make an adjustment. Check and reconfigure the display mode of your graphics card to ensure it is compatible with the projector.
General| Model | GM712/D4K2107 |
|---|---|
| Projector Type | DLP |
| Brightness | 4000 ANSI Lumens |
| Lamp Life | 15, 000 hours (Eco mode) |
| Zoom Ratio | 1.3x |
| Keystone Correction | Vertical ±40° |
| Speakers | 10W |
| Input Interface | HDMI, VGA, USB, RS-232, Audio In/Out |
Procedures for safely cleaning the projector and disconnecting power.
Ensuring accessible power outlets and covering critical safety warnings.
Guidelines for safe and proper use of electrical power with the projector.
Instructions on when to contact qualified service personnel for projector issues.
Important safety guidelines for operating the projector, including lens care and environment.
Safety instructions for handling hot lamps and mounting the projector securely.
Advice on hearing, disposal, mercury, and laser beam safety.
Essential "Do's" and "Don'ts" for initial setup and operation.
Step-by-step instructions and warnings for cleaning the projector lens safely.
Overview of the projector and its key features.
Lists all included items and instructions for checking completeness.
Diagrams and labels identifying the front/upper side components of the projector.
Diagram and list of all connectors and ports located on the rear of the projector.
Diagram and explanation of buttons and indicator LEDs on the projector's control panel.
Diagram and explanation of buttons and functions on the projector's remote control.
Illustrates various connection methods for input sources like HDMI, VGA, and audio.
Step-by-step guide for powering the projector on and off, including LED indicators.
How to adjust the projector's height using its elevator feet and tilt wheel.
Guide on achieving desired image sizes by adjusting projector distance and zoom.
How to navigate and use the projector's OSD menus for settings and adjustments.
Details on display modes, wall color, brightness, contrast, saturation, and tint.
Explains Gamma, Color Management, Dynamic Black, HDR, and ISF calibration.
Options for image orientation and selecting aspect ratios.
How to adjust sharpness and correct keystone distortion.
Options for HDMI color range and scan information.
Options for enabling and configuring 3D display modes and formats.
How to configure source selection, HDMI CEC, and view system information.
Controls for lamp modes, eco features, auto shutdown, and language.
How to adjust volume and mute the audio output.
Solutions for problems like no image, partial display, or incorrect resolution.
Solutions for connectivity, signal loss, and image distortion.
Explains OSD messages like "Fan Fail" and "Projector Overheated" and their solutions.
Solutions for unresponsiveness, lamp issues, and connectivity problems.
Table defining the meaning of different Lamp, Temp, and Power LED states.
Safety warnings and instructions for service personnel on replacing the projector lamp.
Steps and diagrams for securely installing the ceiling mount base.
Details on attaching the projector to the ceiling mount bracket using screws.
Instructions for adjusting the angle and positioning of the mounted projector.
Technical details including projection system, compatibility, scan rates, and package contents.
Specifications on resolution, aspect ratio, throw ratio, lamp, audio, weight, and dimensions.
Table listing resolutions and frequencies supported via VGA analog PC input.
Lists supported HDMI video signals and 3D timing modes.
Compliance information regarding FCC rules for Class B digital devices and interference.
Canadian compliance, general radio device notices, and applicable country lists.
Official statement of compliance with EU harmonisation legislations and applied standards.
Manufacturer's declaration of FCC compliance for the projector.
To Next Page
