How to fix Acer GD711 Projector when no image appears onscreen?
To resolve the issue of no image appearing on the screen of your Acer Projector: * Ensure the projector is connected as described in the "Getting Started" section. * Check that none of the connector pins are bent or broken. * Verify that you have removed the lens cap and the projector is switched on.
How to fix Acer Projector image that is too small or too large?
To correct an image that is too small or too large on your Acer Projector: * Adjust the zoom ring on the projector. * Move the projector closer to or further from the screen. * Press "MENU" on the remote control, navigate to "Image -> Aspect Ratio", and try different settings, or press "RATIO" on the remote control to adjust directly.
What to do if Acer GD711 Smart source shows No signal?
If your Acer Projector's Smart Source displays "No signal", power off the projector and then power it on again.
What to do if Acer GD711 Projector image is out of focus?
If the image on your Acer Projector is out of focus: * Ensure that the lens cap is removed. * Adjust the focus ring on the projector lens. * Confirm that the projection screen is within the required distance of 2.3 to 26.6 feet (0.7 to 8.1 meters) from the projector.
How to fix Acer GD711 when notebook screen is not displaying presentation?
If the screen of your notebook computer is not displaying your presentation on the Acer Projector: * If you are using a Microsoft® Windows® based notebook: Some notebook PCs may deactivate their own screens when a second display device is in use. Refer to your computer's manual for detailed information. * If you are using an Apple® Mac® OS based notebook: In System Preferences, open Display and select Video Mirroring "On".
How to resolve partial or incorrectly displayed image on Acer GD711 Projector (for notebooks)?
To correct a partial, scrolling, or incorrectly displayed image on your Acer Projector when connected to a notebook: * Adjust the resolution of your computer. * Press the toggle output settings. Example: [Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8], Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5]. * If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector.
What to do if Acer GD711 Projector image has slanted sides?
To correct slanted sides on the image of your Acer Projector: * If possible, reposition the projector so that it is centered on the screen. * Press the "Keystone / " button on the remote control until the sides are vertical.
What to do if Acer GD711 Projector image is unstable or flickering?
If the image on your Acer Projector is unstable or flickering: * Adjust the "Tracking" to correct it. * Change the display color depth settings on your computer.
How to fix Acer GD711 Projector image that is reversed?
To correct a reversed image on your Acer Projector, select "Image --> Projection" on the OSD and adjust the projection direction.
General| Number of colors | 1.07 billion colors |
|---|---|
| Native aspect ratio | 16:9 |
| Projection distance | 1.6 - 8.1 m |
| Projection technology | DLP |
| Supported aspect ratios | 4:3, 16:9 |
| Contrast ratio (typical) | 2000000:1 |
| Screen size compatibility | 60 - 300 \ |
| Projector native resolution | 2160p (3840x2160) |
| Vertical synchronization (max) | 0.24 kHz |
| Vertical synchronization (min) | 0.024 kHz |
| Keystone correction, horizontal | -30 - 30 ° |
| Horizontal synchronization (max) | 135 kHz |
| Horizontal synchronization (min) | 31.5 kHz |
| Focus | Manual |
| Throw ratio | 1.22 |
| Digital zoom | 2 x |
| Fixed focal length | 12.77 mm |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 20000 h |
| Service life of light source (economic mode) | 30000 h |
| Serial interface type | - |
| USB 2.0 ports quantity | 1 |
| Interactive | No |
| Noise level | - dB |
| Projection modes | Ceiling, Front, Rear |
| Compatible operating systems | Google Chrome PC, Mac PC, Windows PC |
| High Dynamic Range (HDR) technology | High Dynamic Range 10 (HDR10) |
| Analog signal format system | NTSC, PAL, SECAM |
| RMS rated power | 10 W |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac) |
| Bluetooth version | 4.2 |
| Internal memory | 2 GB |
| Internal memory type | DDR4 |
| Compatible memory cards | MicroSD (TransFlash) |
| Maximum memory card size | 8 GB |
| Power source | AC |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 143 W |
| Processor cores | 4 |
| Processor model | RK3328 |
| Processor architecture | ARM Cortex-A53 |
| Product color | Black |
| Market positioning | Gaming |
Weight and Dimensions| Depth | 232 mm |
|---|---|
| Width | 320 mm |
| Height | 109 mm |
| Weight | 3200 g |
Instructions for safely powering down the projector before maintenance.
Guidance on safe and proper use of electrical power for the projector.
Step-by-step instructions for cleaning the projector lens properly.
Diagrams and instructions for connecting various devices to the projector.
Detailed steps for powering the projector on and off safely.
Guidance on adjusting the height and position of the projected image.
How to navigate and use the projector's Onscreen Display menus.
Detailed explanation of color adjustments like Brightness, Contrast, and Tint.
Guide to diagnosing and resolving common image and projector problems.
To Next Page
