Need help?Do you have a question about the Acer H6510BD and is the answer not in the manual?
General| Number of colors | 1.073 billion colors |
|---|---|
| Native aspect ratio | 16:9 |
| Projection distance | - m |
| Projection technology | DLP |
| Supported aspect ratios | - |
| Contrast ratio (typical) | 10000:1 |
| Screen size compatibility | 45 - 300 \ |
| Projector native resolution | 1080p (1920x1080) |
| Keystone correction, vertical | -40/+40 ° |
| Vertical synchronization (max) | 0.120 kHz |
| Vertical synchronization (min) | 0.05 kHz |
| Horizontal synchronization (max) | 100 kHz |
| Horizontal synchronization (min) | 30 kHz |
| Projector brightness (economic mode) | 2400 ANSI lumens |
| Digital zoom | 2 x |
| Zoom capability | Yes |
| Focal length range | - mm |
| Aperture range (F-F) | 2.59 - 2.87 |
| Service life of light source | 4000 h |
| Service life of light source (economic mode) | 5000 h |
| Analog signal format system | NTSC, PAL, SECAM |
| Supported graphics resolutions | 1920 x 1200 (WUXGA) |
| RMS rated power | 2 W |
| Number of built-in speakers | 1 |
| Built-in display | No |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN (RJ-45) ports | 0 |
| Noise level | 34 dB |
| Placement | Desktop |
| Product type | Standard throw projector |
| Product color | White |
| Market positioning | Home cinema |
| Power source | AC |
| AC input voltage | 110 - 220 V |
| Power consumption (standby) | - W |
Weight and Dimensions| Depth | 220 mm |
|---|---|
| Width | 264 mm |
| Height | 78 mm |
| Weight | 2200 g |
Information on powering and using 3D glasses for the 3D Vision system.
Steps to configure the 3D environment after installing NVIDIA drivers.
Ensuring compatibility and availability of DLP 3D glasses.
Verifying graphics card support and installing necessary drivers.
Downloading a suitable 3D player for DLP 3D content.
Steps to configure the 3D environment for DLP 3D technology.
Notes on HDMI 1.4a connections and older resolution settings.
Instructions to enable 3D playback via projector OSD or e3D Management.
Selecting appropriate 3D format for correct display.
To Next Page
