How to fix Acer H6517BD when no image appears on screen?
First, ensure the projector is connected as described in the "Getting Started" section and that none of the connector pins are bent or broken. Check that the projector lamp has been securely installed. Also, verify that you've removed the lens cap and that the projector is switched on.
What to do if Acer H6517BD Projector image is too small or too large?
Try these steps: Adjust the zoom lever on the top of the projector. Move the projector closer to or further from the screen. Also, you can press "MENU" on the remote control, go to "Image - -> Aspect Ratio", and try different settings, or press "RATIO" on the remote control to adjust directly.
Why is Acer H6517BD screen not displaying notebook presentation?
If you are using a Microsoft® Windows® based notebook: Some notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. Refer to your computer's manual for detailed information. If you are using an Apple® Mac® OS based notebook: In System Preferences, open Display and select Video Mirroring "On".
Why is Acer H6517BD Projector image out of focus?
First, ensure that the lens cap is removed. Then, adjust the focus ring on the projector lens. Finally, make sure the projection screen is within the required distance of 4.9 to 32.0 feet (1.5 to 9.8 meters) (XGA series) / 4.9 to 27.1 feet (1.5 to 8.3 meters) (WXGA series) / 1.6 to 10.9 feet (0.5 to 3.3 meters) (1080p, H6517ST/E145S/HE-801ST series) / 4.9 to 32.2 feet (1.5 to 9.8 meters) (1080p, H6517BD/ E145D/HE-801J series) / 4.3 to 23.3 feet (1.3 to 7.1 meters) (1080p, P5515/N156/PN-805 series) from the projector.
How to fix Acer H6517BD image with slanted sides?
Try these solutions to correct slanted sides on your projector image: If possible, reposition the projector so that it is centered on the screen. Alternatively, press the "Keystone / " button on the remote control until the sides are vertical. If the "Keystone" button is unavailable on the remote control, press "MENU" on the remote control, go to "Image - -> Auto Keystone" and choose "Off" on the OSD.
What to do if Acer H6517BD Projector image is unstable or flickering?
Adjust the "Tracking" to correct it. Change the display color depth settings on your computer.
How to correct reversed image on Acer H6517BD Projector?
To correct a reversed image, select "Image --> Projection" on the OSD and adjust the projection direction.
How to fix Acer H6517BD Projector image stretched when displaying a widescreen DVD?
When playing a DVD encoded in anamorphic or 16:9 aspect ratio, you may need to adjust these settings: If playing a 4:3 format DVD title, change the format to 4:3 in the projector OSD. If the image is still stretched, adjust the aspect ratio and set up the display format to 16:9 (wide) aspect ratio on your DVD player. If you play an Letterbox (LBX) format DVD title, please change the format to Letterbox (LBX) in the projector OSD.
What to do if Acer H6517BD stops responding to controls?
If your projector stops responding, turn it off, unplug the power cord, and wait at least 30 seconds before reconnecting the power.
What to do if Acer H6517BD image has vertical flickering bar?
To address a vertical flickering bar, use "Frequency" to make an adjustment. Check and reconfigure the display mode of your graphics card to ensure it is compatible with the projector.
General| Number of colors | 1.073 billion colors |
|---|---|
| Native aspect ratio | 16:9 |
| Projection distance | 1.5 - 9.8 m |
| Projection technology | DLP |
| Contrast ratio (typical) | 10000:1 |
| Screen size compatibility | - \ |
| Projector native resolution | 1080p (1920x1080) |
| Keystone correction, vertical | -40 - 40 ° |
| Vertical synchronization (max) | 0.12 kHz |
| Vertical synchronization (min) | 0.024 kHz |
| Horizontal synchronization (max) | 100 kHz |
| Horizontal synchronization (min) | 15 kHz |
| Focus | Manual |
| Throw ratio | 1.48 - 1.62 |
| Digital zoom | 2 x |
| Optical zoom | 1.1 x |
| Zoom capability | Yes |
| Focal length range | 22.41 - 26.82 mm |
| RS-232 ports | 0 |
| Maximum digital resolution | 1920 x 1200 pixels |
| Lamp type | OSRAM |
| Lamp power | 210 W |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 4000 h |
| Service life of light source (economic mode) | 6000 h |
| Analog signal format system | NTSC, PAL, SECAM |
| DVI port | No |
| USB connector type | Mini-USB B |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Noise level | 27 dB |
| Noise level (economic mode) | 33 dB |
| RMS rated power | 2 W |
| Placement | Desktop, Ceiling |
| Product type | Standard throw projector |
| Product color | White |
| Market positioning | Home cinema |
| Power source | AC |
| Power consumption (standby) | - W |
| Power consumption (typical) | 255 W |
| Power consumption (PowerSave) | 196 W |
| Operating temperature (T-T) | 0 - 40 °C |
| Cables included | AC, VGA |
Weight and Dimensions| Weight | 2500 g |
|---|
Critical warnings on electrical safety, placement, ventilation, and water hazards.
Guidelines for safe connection and disconnection of the power supply unit.
Advice on accessible power outlets and key safety warnings.
Safe practices for using electrical power with the projector.
When to seek qualified service and additional safety guidelines for operation.
Advice on hearing protection and environmentally responsible disposal.
Information regarding mercury in lamps and proper disposal procedures.
Essential guidelines for operating the projector correctly.
Precautions to maximize projector lifespan and ensure safe usage.
Highlights the projector's advanced technologies and capabilities.
Identifies key external parts of the projector from the front and top views.
Diagram and list of projector's rear and side ports and connectors.
Illustrates connection methods for various devices to the projector.
Shows an alternative connection diagram for device setup.
Steps to turn on the projector and automatically detect input sources.
Instructions for shutting down the projector, including cooling procedures.
How to adjust the projector's height using its tilt mechanism.
Introduction to the OSD menu for projector setup and maintenance.
Lists the various settings and options available within the Installation menu.
Instructions on how to navigate and use the projector's OSD menus.
Selects viewing modes and adjusts for wall color effects.
Adjusts core image parameters like brightness, contrast, color saturation, and hue.
Fine-tuning color temperature, dynamic black, gamma, and advanced color management.
Sets projector orientation for desktop, ceiling, or rear projection.
Adjusts image aspect ratio and automatic vertical keystone correction.
Manual adjustment of horizontal, vertical keystone, and four-corner image shaping.
Adjusts image sharpness and horizontal/vertical positioning.
Fine-tunes signal frequency, tracking, and HDMI color/scan settings.
Selects or customizes the projector's initial startup screen.
Manages input source locking and closed captioning features.
Configures VGA OUT, WirelessHD pairing, and factory reset.
Enables and configures password protection for projector access.
Manages security timeouts, passwords, and network settings.
Controls ECO mode, high altitude cooling, shutdown options, and lamp status.
Manages reminders for dust filter cleaning and replacement.
Enables and configures 3D display modes, formats, and warnings.
Selects the preferred language for the onscreen display menus.
Instructions on how to access and log into the projector's web management interface.
Navigating the home page and using the control panel for settings adjustment.
Setting up network parameters and email alerts for projector status.
Instructions for securely logging out of the projector's web management interface.
A guide to diagnose and resolve common projector problems.
Solutions for common issues related to image display and quality.
Specific troubleshooting steps for image problems originating from notebook computers.
Solutions for image stretching, size, alignment, and reversal problems.
Explains the meaning of various onscreen display messages.
Addresses issues like unresponsive controls and lamp malfunctions.
Defines the meanings of LED lights and alarm signals for status and errors.
Step-by-step guide for cleaning the projector's dust filters.
Detailed instructions for safely replacing the projector lamp module.
Comprehensive instructions for mounting the projector to a ceiling.
Details on projection technology, resolutions, and computer OS/standards compatibility.
Supported video formats, aspect ratios, and projection lens characteristics.
Information on displayable colors, screen size range, and throw ratios.
Recommended distances and scan rates for optimal performance.
Details on lamp type, audio output, keystone, and projector weight.
Physical dimensions, zoom, power supply, and consumption details.
Operating temperature range and standard package inclusions.
Compares the availability of I/O connectors across different projector models.
Lists compatible PC resolutions and frequencies for VGA analog input.
Supported resolutions and timings for VGA analog extended wide signals.
Supported component video signals (YPbPr, YCbCr) via VGA.
Lists compatible PC resolutions and frequencies for HDMI digital input.
Supported resolutions and timings for HDMI digital extended wide signals.
Supported video signals via HDMI input.
Supported timings for various HDMI 1.4a 3D formats.
Supported resolutions and frequencies for MHL digital signals.
Details FCC rules regarding radio frequency interference and device operation.
Notice for Canadian users on compliance with radio communication device regulations.
To Next Page
