To Next Page
C
cuevasbryanSep 22, 2025
How to correct reversed image on Acer H6545BD Projector?
- CcamposrebeccaSep 22, 2025
To correct a reversed image on your Acer Projector: * Select 'Image --> Projection Mode' on the OSD and adjust the projection direction.
How to correct reversed image on Acer H6545BD Projector?
To correct a reversed image on your Acer Projector: * Select 'Image --> Projection Mode' on the OSD and adjust the projection direction.
How to fix Acer H6545BD Projector when LAN/WiFi, USB Display source show No signal?
Power off projector and power on again.
Why is the image too small or too large on my Acer Projector?
If the image from your Acer Projector is too small or too large, here are a few things you can try: * Adjust the zoom ring on the projector. * Move the projector closer to or further from the screen. * Press 'MENU' on the remote, go to 'Image - -> Aspect Ratio' and try different settings, or press 'RATIO' on the remote to adjust directly.
What to do if Acer H6545BD image is out of focus?
First, make sure that the lens cap is removed. Then, adjust the focus ring on the projector lens. Also, ensure the projection screen is within the required distance from the projector.
Why does the Acer H6545BD Projector lamp burn out or make a popping sound?
If the Acer Projector lamp burns out or makes a popping sound: * When the lamp reaches the end of its useful life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced.
What to do if image hangs up when displaying photo or document in Media on Acer Projector?
If the Acer Projector image freezes when displaying a photo or document in Media: * Power off the projector and then power it on again.
How do I fix a reversed image on my Acer H6545BD Projector?
Select "Image --> Projection Mode" on the OSD and adjust the projection direction.
What does it mean if Acer H6545BD lamp burns out or makes a popping sound?
When the lamp reaches the end of its useful life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced.
Why is the notebook screen not displaying my presentation on Acer H6545BD?
If the notebook computer screen isn't displaying your presentation when connected to the Acer Projector: * For Microsoft® Windows® notebooks: Some may deactivate their screens when a second display is used. Refer to your computer's manual for reactivation. * For Apple® Mac® OS notebooks: In System Preferences, open Display and select Video Mirroring 'On'.
How to fix partial, scrolling, or incorrectly displayed image on Acer H6545BD Projector (for PC (Windows 2000/XP/Vista/ Windows 7/ Windows 8))?
For an incorrectly displayed image: Open "My Computer", open the "Control Panel", and then double-click the "Display" icon. Select the "Settings" tab. Verify that your display resolution setting is lower than or equal to WUXGA-RB (1920 x 1200). Click the "Advanced Properties" button. If the problem still appears, change the monitor display you are using and follow the steps below: Verify that the resolution setting is lower than or equal to WUXGA-RB (1920 x 1200). Click the "Change" button under the "Monitor" tab. Click "Show all devices". Next, select "Standard monitor types" under the SP box, and choose the resolution mode you need under the "Models" box. Verify that the resolution setting of the monitor display is lower than or equal to WUXGA-RB (1920 x 1200).
General
