Acer H6545BD - User Manual

Questions and Answers

D
David BoydSep 12, 2025
What does it mean if Acer H6545BD lamp burns out or makes a popping sound?
- R
  Robert ContrerasSep 12, 2025
  When the lamp reaches the end of its useful life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced.
C
Chad BrennanSep 12, 2025
How do I fix a reversed image on my Acer H6545BD Projector?
- A
  Aaron DavisSep 12, 2025
  Select "Image --> Projection Mode" on the OSD and adjust the projection direction.
O
orozcoangieSep 9, 2025
Why is the screen of my notebook computer not displaying my presentation on Acer H6545BD Projector?
- W
  William KimSep 10, 2025
  If you are using a Microsoft® Windows® based notebook: Some notebook PCs may deactivate their own screens when a second display device is in use. If you are using an Apple® Mac® OS based notebook: In System Preferences, open Display and select Video Mirroring "On".
S
Sylvia QuinnSep 8, 2025
How to fix Acer Projector image with vertical flickering bar?
- S
  Stephanie AndersonSep 8, 2025
  Use "Frequency" to make an adjustment. Check and reconfigure the display mode of your graphics card to make it compatible with the projector.
R
ryan01Aug 23, 2025
How to fix Acer Projector when no image appears on screen?
- N
  nwareAug 23, 2025
  First, ensure the projector is connected properly. Check that none of the connector pins are bent or broken. Verify the projector lamp is securely installed. Also, confirm that you've removed the lens cap and the projector is switched on.
E
Elizabeth FisherSep 6, 2025
What to do if Acer H6545BD Projector LAN/WiFi, USB Display source show no signal?
- J
  john82Sep 6, 2025
  If the Acer Projector shows 'No signal' for LAN/WiFi, USB Display source: * Power off the projector and then power it on again.
S
Shannon MercadoSep 4, 2025
What to do if Acer H6545BD Projector image is partial or scrolling on notebooks?
- J
  janewilsonSep 4, 2025
  If you see a partial, scrolling, or incorrectly displayed image on your Acer Projector with notebooks, here’s what to do: * Adjust the resolution of your computer. * Press the toggle output settings. Example: [Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8], Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5] * If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector.
J
johnsonjosephSep 3, 2025
Why is the notebook screen not displaying my presentation on Acer H6545BD?
- M
  Meghan MooreSep 3, 2025
  If the notebook computer screen isn't displaying your presentation when connected to the Acer Projector: * For Microsoft® Windows® notebooks: Some may deactivate their screens when a second display is used. Refer to your computer's manual for reactivation. * For Apple® Mac® OS notebooks: In System Preferences, open Display and select Video Mirroring 'On'.
D
David HerreraSep 2, 2025
Why no image appears on Acer H6545BD?
- P
  Paul JohnsonSep 2, 2025
  If you're getting no image on your Acer Projector screen, check the following: * Ensure it's connected as described in the 'Getting Started' section. * Make sure none of the connector pins are bent or broken. * Check if the projector lamp has been securely installed. * Verify that you've removed the lens cap and the projector is switched on.
K
Kaitlin WilliamsSep 1, 2025
How to fix partial, scrolling, or incorrectly displayed image on Acer H6545BD Projector (for PC (Windows 2000/XP/Vista/ Windows 7/ Windows 8))?
- M
  Megan FullerSep 1, 2025
  For an incorrectly displayed image: Open "My Computer", open the "Control Panel", and then double-click the "Display" icon. Select the "Settings" tab. Verify that your display resolution setting is lower than or equal to WUXGA-RB (1920 x 1200). Click the "Advanced Properties" button. If the problem still appears, change the monitor display you are using and follow the steps below: Verify that the resolution setting is lower than or equal to WUXGA-RB (1920 x 1200). Click the "Change" button under the "Monitor" tab. Click "Show all devices". Next, select "Standard monitor types" under the SP box, and choose the resolution mode you need under the "Models" box. Verify that the resolution setting of the monitor display is lower than or equal to WUXGA-RB (1920 x 1200).