Why no image appears on my Acer Projector?
If no image appears on your Acer Projector, ensure it's connected as described in the "Getting Started" section. Also, check for bent or broken connector pins and make sure the projector lamp is securely installed. Verify that the lens cap has been removed and the projector is switched on.
What to do if image is too small or too large on Acer H5360?
If the image on your Acer Projector is too small or too large, adjust the zoom lever on the front of the projector. You can also move the projector closer to or further from the screen. Alternatively, press "MENU" on the remote, go to "Image --> Aspect Ratio" and try different settings, or press "Aspect Ratio" directly on the remote.
How to fix Acer Projector when no image appears on screen?
If no image appears on the screen when using your Acer Projector, ensure the connections are correctly set up as described in the 'Getting Started' section, and that none of the connector pins are bent or broken. Also, verify that the projector lamp is securely installed. Finally, make sure you have removed the lens cap and the projector is switched on.
How to adjust Acer H5360 Projector image size?
If your Acer Projector's image is too small or too large, you can adjust the zoom lever on the front of the projector. Alternatively, move the projector closer to or further from the screen. You can also press 'MENU' on the remote control, navigate to 'Image --> Aspect Ratio', and experiment with different settings, or press 'Aspect Ratio' on the remote to adjust directly.
How to fix out of focus image on Acer Projector?
To fix an out-of-focus image on your Acer Projector, first, ensure that the lens cap is removed. Then, adjust the focus ring on the projector lens. Also, make sure the projection screen is within the required distance of 3.3 to 33.8 feet (1.0 to 10.3 meters) from the projector.
How to adjust focus on Acer Projector?
If the image from your Acer Projector is out of focus, first ensure that the lens cap is removed. Then, adjust the focus ring on the projector lens. Also, confirm that the projection screen is within the required distance of 3.3 to 33.8 feet (1.0 to 10.3 meters) from the projector.
What to do if Acer H5360 Projector image is partial or scrolling on Windows?
If your Acer Projector displays a partial, scrolling, or incorrectly displayed image when connected to a PC (Windows 95/98/2000/XP), start by pressing 'RESYNC' on the remote control. For an incorrectly displayed image, open 'My Computer,' then the 'Control Panel,' and double-click the 'Display' icon. Select the 'Settings' tab and ensure your display resolution setting is lower than or equal to UXGA (1600 x 1200). If the problem persists, change the monitor display and verify that the resolution setting is still lower than or equal to UXGA (1600 x 1200).
What to do if Acer Projector image is partial or scrolling on a notebook?
If your Acer Projector displays a partial, scrolling, or incorrectly displayed image when connected to a notebook, first press 'RESYNC' on the remote control. For an incorrectly displayed image, adjust the resolution of your computer. Then, press the toggle output settings (e.g., [Fn]+[F4] for some Compaq models). If you still have issues changing resolutions or your monitor freezes, restart all equipment, including the projector.
How to correct image with slanted sides on Acer H5360?
To correct an image with slanted sides on your Acer Projector, if possible, reposition the projector so that it is centered on the screen. You can also press the "Keystone / " button on the remote control until the sides are vertical. If the "Keystone" button is unavailable, press "MENU" on the remote, go to "Image - -> Auto Keystone" and choose "Off" on the OSD.
How to fix unstable or flickering image on Acer Projector?
To resolve an unstable or flickering image on your Acer Projector, adjust the "Tracking". If the issue persists, change the display color depth settings on your computer.
General| Resolution | 1280 x 720 |
|---|---|
| Brightness | 2500 ANSI lumens |
| Contrast Ratio | 3200:1 |
| Aspect Ratio | 16:9 |
| Display Technology | DLP |
| Zoom Ratio | 1.2x |
| Keystone Correction | ±40 degrees (Vertical) |
| Input Connectors | HDMI, VGA, Composite, S-Video |
| Lamp Life | 4000 Hours (Standard), 5000 Hours (Economy) |
Essential safety guidelines for operation, power, servicing, environment, and disposal.
Guidelines for safe use of electrical power, including grounding and cord management.
Information on product servicing, operating environments, and additional safety measures.
Safety considerations for wireless functions, medical devices, and potentially explosive environments.
Overview of projector features, specifications, and included accessories.
Identification of projector parts and layout of the remote control.
Instructions for connecting, powering on/off, and initial image adjustment.
Navigating menus, adjusting display, system, management, audio, timer, and language settings.
Guide for diagnosing and resolving common image problems and projector issues.
Instructions for lamp replacement and ceiling mount installation.
Technical specs, supported modes, and compatibility information for the projector.
FCC, CE, and other regulatory compliance information and safety warnings.
To Next Page
