How to adjust Acer H5360 Projector image size?
If your Acer Projector's image is too small or too large, you can adjust the zoom lever on the front of the projector. Alternatively, move the projector closer to or further from the screen. You can also press 'MENU' on the remote control, navigate to 'Image --> Aspect Ratio', and experiment with different settings, or press 'Aspect Ratio' on the remote to adjust directly.
How to fix Acer Projector when no image appears on screen?
If no image appears on the screen when using your Acer Projector, ensure the connections are correctly set up as described in the 'Getting Started' section, and that none of the connector pins are bent or broken. Also, verify that the projector lamp is securely installed. Finally, make sure you have removed the lens cap and the projector is switched on.
What to do if image is too small or too large on Acer H5360?
If the image on your Acer Projector is too small or too large, adjust the zoom lever on the front of the projector. You can also move the projector closer to or further from the screen. Alternatively, press "MENU" on the remote, go to "Image --> Aspect Ratio" and try different settings, or press "Aspect Ratio" directly on the remote.
General| Resolution | 1280 x 720 |
|---|---|
| Brightness | 2500 ANSI lumens |
| Contrast Ratio | 3200:1 |
| Aspect Ratio | 16:9 |
| Display Technology | DLP |
| Zoom Ratio | 1.2x |
| Keystone Correction | ±40 degrees (Vertical) |
| Input Connectors | HDMI, VGA, Composite, S-Video |
| Lamp Life | 4000 Hours (Standard), 5000 Hours (Economy) |
Essential safety guidelines for operation, power, servicing, environment, and disposal.
Guidelines for safe use of electrical power, including grounding and cord management.
Information on product servicing, operating environments, and additional safety measures.
Safety considerations for wireless functions, medical devices, and potentially explosive environments.
Overview of projector features, specifications, and included accessories.
Identification of projector parts and layout of the remote control.
Instructions for connecting, powering on/off, and initial image adjustment.
Navigating menus, adjusting display, system, management, audio, timer, and language settings.
Guide for diagnosing and resolving common image problems and projector issues.
Instructions for lamp replacement and ceiling mount installation.
Technical specs, supported modes, and compatibility information for the projector.
FCC, CE, and other regulatory compliance information and safety warnings.
To Next Page
