What to do if Acer Projector image is partial or incorrectly displayed on PC?
- MMolly PattonNov 28, 2025
If your Acer Projector displays a partial, scrolling, or incorrectly displayed image on your PC: * Press "RESYNC" on the remote control or control panel. * Open "My Computer," then the "Control Panel," and double-click the "Display" icon. * Select the "Settings" tab and verify that your display resolution setting is lower than or equal to UXGA (1600 x 1200). * Click the "Advanced Properties" button. If the problem persists, change the monitor display you are using and verify that the resolution setting is lower than or equal to UXGA (1600 x 1200). Click the "Change" button under the "Monitor" tab, then "Show all devices". Next, select "Standard monitor types" under the SP box, and choose the resolution mode you need under the "Models" box. Verify that the resolution setting of th...










