22
Management
Note: Functions vary depending on model definition.
Lamp Mode Normal: normal power consumption mode
Eco: dim the projector lamp which will lower power consumption
Dynamic: automatically optimize the display of dark ovie scenes
enabling them to be shown in incredible detail.
Eco mode Choose "On" to dim the projector lamp which will lower power
consumption and reduce noise. Choose "Off" to return normal
mode.
High Altitude Choose "On" to turn on High Altitude mode. Operate the fans at
full speed continuously to allow for proper high altitude cooling of
the projector.
Auto shutdown
(Minutes)
The projector will automatically shutdown when there is no signal
input after the allocated time. (default is 15 minutes)
Menu Display Time
(Seconds)
Choose the OSD menu display time. (Default is 15 seconds). Select
“Manual” to turn off main menu/one direct-key menu manually by
user.
Auto Power On
AC Power on
Choose "On" to power on projector while AC power plug in.
HDMI power on
Choose "On" to power on projector while HDMI cable plug in.
VGA Power On
Choose "On" to power on projector while VGA power plug in.
Language
Choose the multilingual OSD menu. Use the key to select
your preferred menu language.
• Press "ENTER" to confirm the selection.
To Next Page
Loading...
