C
Carla RoweSep 19, 2025
How to correct reversed image on Acer DNX1713?
- JJoseph RileySep 22, 2025
To correct a reversed image on your Acer Projector: * Select 'Image --> Projection Mode' on the OSD and adjust the projection direction.
To Next PageTo Next PageHow to correct reversed image on Acer DNX1713?
To correct a reversed image on your Acer Projector: * Select 'Image --> Projection Mode' on the OSD and adjust the projection direction.
How to fix Acer DNX1713 Projector when LAN/WiFi, USB Display source show No signal?
Power off projector and power on again.
Why is the image too small or too large on my Acer DNX1713 Projector?
If the image from your Acer Projector is too small or too large, here are a few things you can try: * Adjust the zoom ring on the projector. * Move the projector closer to or further from the screen. * Press 'MENU' on the remote, go to 'Image - -> Aspect Ratio' and try different settings, or press 'RATIO' on the remote to adjust directly.
What to do if Acer DNX1713 Projector image is out of focus?
First, make sure that the lens cap is removed. Then, adjust the focus ring on the projector lens. Also, ensure the projection screen is within the required distance from the projector.
Why does the Acer DNX1713 lamp burn out or make a popping sound?
If the Acer Projector lamp burns out or makes a popping sound: * When the lamp reaches the end of its useful life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced.
What to do if image hangs up when displaying photo or document in Media on Acer Projector?
If the Acer Projector image freezes when displaying a photo or document in Media: * Power off the projector and then power it on again.
How do I fix a reversed image on my Acer DNX1713?
Select "Image --> Projection Mode" on the OSD and adjust the projection direction.
What does it mean if Acer DNX1713 Projector lamp burns out or makes a popping sound?
When the lamp reaches the end of its useful life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced.
Why is the notebook screen not displaying my presentation on Acer DNX1713?
If the notebook computer screen isn't displaying your presentation when connected to the Acer Projector: * For Microsoft® Windows® notebooks: Some may deactivate their screens when a second display is used. Refer to your computer's manual for reactivation. * For Apple® Mac® OS notebooks: In System Preferences, open Display and select Video Mirroring 'On'.
How to fix partial, scrolling, or incorrectly displayed image on Acer DNX1713 Projector (for PC (Windows 2000/XP/Vista/ Windows 7/ Windows 8))?
For an incorrectly displayed image: Open "My Computer", open the "Control Panel", and then double-click the "Display" icon. Select the "Settings" tab. Verify that your display resolution setting is lower than or equal to WUXGA-RB (1920 x 1200). Click the "Advanced Properties" button. If the problem still appears, change the monitor display you are using and follow the steps below: Verify that the resolution setting is lower than or equal to WUXGA-RB (1920 x 1200). Click the "Change" button under the "Monitor" tab. Click "Show all devices". Next, select "Standard monitor types" under the SP box, and choose the resolution mode you need under the "Models" box. Verify that the resolution setting of the monitor display is lower than or equal to WUXGA-RB (1920 x 1200).
Essential safety rules for operation, power, and accessibility.
Advice on electrical power use, servicing, and additional safety measures.
Explains the projector's control panel and remote layout and functions.
Guides on connecting devices and turning the projector on/off.
Guides for resolving problems, OSD messages, and LED/alarm definitions.
General