5-54 Service and Maintenance
3. Connect the following cables:
• Speaker cable connector (A)
• Touch panel control cable connector (B)
• LVDS cable connector (C)
• WLAN antenna cable connector (D)
• Microphone connector (E)
• DC-In cable connector (F)
• GPS antenna cable connector (G)
Figure 5-86. Connecting the Cables to the Mainboard
4. Install the battery (see Battery Installation on page 5-21)
Table 5-6. Mainboard Screws
Screw Name Screw Type Quantity
M 2.0 x 3.0 6
To Next Page
Loading...
