5-28 Service and Maintenance
3. Disconnect the speakers connector from the mainboard connector (A).
Figure 5-42. Disconnecting the Speakers and Touch Panel Cables
4. Disconnect the touch module cable connectors (B) and release the speakers cable from the
guides.
(Figure 5-42)
CAUTION:
The touch module cable may be damaged when folded. Do not fold the touch module cable.
5. Remove the three (3) screws (C) from the bezel.
Figure 5-43. Removing the Speakers
6. Remove the speakers (D) from the bezel. (Figure 5-43)
To Next Page
Loading...
