Disassembly Procedures 1-9
3. Push the bottom left tab (marked with red-white circle) of the battery slightly upwards and lift
the battery to release it from the upper tabs (marked with green-white circle) and guide pin on
the upper case. Then remove the battery.
Figure 1-8. Removing the Battery
Table 1-2. Battery Screw
Screw Name Screw Type Torque Quantity
M 2.0 x 4.0
1.8~2.2kgf.cm
1
WEEE Annex VII Component:
Battery Pack
To Next Page
Loading...
