1. Press the Menu hot key to open the OSD.
2. Using the ▲/▼ keys, select Audio from the OSD. Then navigate to the picture element
you wish to adjust.
3. Use the ◄/► keys to select the setting or adjust the sliding scales.
4. Volume: Adjust the volume
Performance
1. Press the Menu hot key to open the OSD.
2. Using the ▲/▼ keys, select Performance from the OSD. Then navigate to the picture
element you wish to adjust.
3. Use the ◄/► keys to select the setting.
4. Over Drive: Select Off, Normal, or Extreme.
To Next Page
Loading...
