Acer X1230S Series - System Disassembling and Replacement; Main Unit Disassembly Steps

33
Chapter 3 System Disassembling and Replacement
Main Unit Disassembling
Tool : Screw Driver --Hex (#4-40) and Cross(Mechanical : M3,M4, Opt.Engine :M2)
Process :
Step Discription Tool Notice
1
Disassemble the
screw*5(M3*7L).
screw
driver
2
(1) Take off the the IR
sensor wire from
mainboard,
(2) Take off upper case
module.
When taking
off upper
case module,
be careful not
to break the
IR-M/B wire.
3
(1) Take off the case
outlet case module
(2) Take off the front
case module
(3) (For
X1230/X1230S/X1230S/
X1230K):
Take off the screw*4
(M3*7L) and speaker
from the outlet case
module
screw
driver
keypad bracket
2
1
3
4
5
FRONT
IR BD
1
2
4
3
keypad Rubber
Three long sponge
Two sponge
4
<For X1130> :
Disassemble the
screw*2(STAND OFF
XH4#-40), and take off
the rear case.
<For
X1230/X1230S/X1235/X
1230K> :
Disassemble the
screw*4(STAND OFF
XH4#-40), and take off
the rear case.
screw
driver
rear case
1 2
3
4
rear case
1
2