Acer X1230S Series - Page 35

35
9
(1) Disassemble the
screw*2(M3*6L), and
take off the lamp door.
(2) Disassemble the
screw*1(M3*4L) and
lamp wire, and take off
the lamp module.
screw
driver
10
(1) Disassemble the
screw*3(M3*8L).
(2) Disassemble the
grounding screw*1
(M4*6L), and take off the
Power B/D SHD.
screw
driver
11
(1) Disassemble the
wire*2 and screw*1(
M3*7L),
(2) Take off the power
BD and ballast Mylar.
screw
driver
12
(1) Disassemble the
screw*2(M3*7L), and
take off the lamp box.
(2) Disassembly the
screw*2(M3*8L), and
take off the blower fan.
screw
driver
screw*1
1
2
3
grounding screw *1
ballast
wire
screw*1
blower fan's
thermal wire
screw*1
screw*1
screw*1
screw*1
2
1
Ballast Mylar
13
Disassemble the
screw*3(M3*7L), and
take off the OPT eng .
screw
driver
定位
点
1
2
3
anchor
point
定位
点
2
anchor
point
1
3
<For X1130/X1230/X1235/X1230K> <For X1230S>