How to fix Acer X1373WH with no image on screen?
First, ensure all cables are correctly connected. Check for bent or broken connector pins. Verify the projection lamp is securely installed. Finally, ensure the Acer Projector is switched on.
What to do if Acer X1373WH Projector image is too small or too large?
To adjust the image size on your Acer Projector, use the zoom lever on top of the projector. You can also move the projector closer to or further from the screen. Alternatively, press "MENU", go to "Image" > "Aspect Ratio", and try different settings.
What to do if Acer X1373WH image is out of focus?
Adjust the focus ring on the projector lens of your Acer Projector. Also, make sure the projection screen is within the required distance of 4.9 to 19.7 feet (1.5 to 6 meters).
How to fix unstable or flickering image on Acer X1373WH?
Correct the unstable or flickering image on your Acer Projector by using the "Tracking" setting. Also, try changing the display color setting on your computer.
How to fix partial or scrolling image on Acer X1373WH Projector (notebooks)?
Press "RESYNC" on the control panel or remote control of your Acer Projector. For an incorrectly displayed image: Adjust the resolution of your computer. Press the toggle output settings. If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector.
Why notebook computer screen is not displaying presentation on Acer X1373WH Projector?
If you're using a Microsoft® Windows® based notebook with your Acer Projector: Some notebooks deactivate their screens when a second display is used. Refer to your computer's manual for reactivation instructions. If you're using an Apple® Mac® OS based notebook: Open Display in System Preferences and turn Video Mirroring "On."
Why does Acer X1373WH lamp burn out or makes a popping sound?
When the lamp in your Acer Projector reaches the end of its life, it will burn out and may make a loud popping sound. If this occurs, the projector will not turn on until you replace the lamp module.
What to do if Acer Projector image has slanted sides?
Reposition the Acer Projector so it's centered on the screen and below the bottom edge, if possible. Use the Keystone correction keys on the control panel or remote until the image is square. Alternatively, go to "Image" > "Auto Keystone" or "Image" > "Keystone" in the OSD menu to make adjustments.
How to correct reversed image on Acer X1373WH?
To correct a reversed image on your Acer Projector, go to "Image" > "Projection Mode" or "Image" > "Projection Location" in the OSD and adjust the projection direction.
How to fix Acer X1373WH Projector image with vertical flickering bar?
To fix a vertical flickering bar on your Acer Projector's image, use the "Frequency" setting to make an adjustment. Also, check and reconfigure the display mode of your graphics card to ensure it's compatible with the projector.
Covers general safety, plug, accessibility, warnings, and environmental advice.
Instructions for using electrical power, grounding, and avoiding overloads.
Guidelines for product servicing, maintenance, and environmental considerations.
Recommendations for safe listening, proper disposal, and mercury advisories.
Important usage notes, do's, don'ts, and general precautions for the projector.
Overview of the projector and its key features and technologies.
Details the items included in the projector's package contents.
Visual identification of front and rear projector components.
Explains the functions of buttons on the projector's control panel.
Identifies and describes the functions of the remote control buttons.
Guide on using remote control buttons to operate a connected smartphone.
Instructions and diagrams for connecting various input devices to the projector.
Step-by-step guide for powering the projector on and off.
How to use elevator feet to adjust the projector's image height.
Tables and diagrams for achieving optimal image sizes at different distances.
Guide on adjusting distance and zoom for desired image sizes.
General explanation of navigating user controls and menus.
Details the Onscreen Display (OSD) for projector installation and maintenance.
Explanation of how to use and navigate the projector's OSD menus.
Adjustments for color, brightness, contrast, saturation, and image projection.
Settings for projection modes, aspect ratio, keystone, and sharpness.
Customization of startup screen, source lock, and closed captioning.
Configuration for projector security, password, and timeout functions.
Options for ECO mode, high altitude, auto shutdown, and lamp management.
Enabling and configuring 3D display modes and settings.
Adjustments for volume, mute, and notification volumes.
Step-by-step guide for safely replacing the projector lamp.
Common image problems, solutions, and projector issues.
Explanations of onscreen messages related to projector status.
Listing and explanation of LED indicators and alarm messages.
Instructions for mounting the projector to a ceiling.
Technical details and performance characteristics of the projector.
Supported video and PC signal resolutions and frequencies.
FCC, Canadian, and general regulatory compliance information.
EU, FCC, and other declarations of product conformity.
To Next Page
General
