Acer XB283K V3

English
System
Move
Back
Enter
Game Assistant
1366x768
Resolution
60
Hz
Picture
HDMI 1
Input
Off
FreeSync
Color
0SD
Gaming
Audio
System
Input
Auto Source
Wide Mode
Hot Key Assignment
DOC/CI
HDMI Black Level
Quick Start Mode
Over Clock
Move
Back
Enter
Game Assistant
1366x768
Resolution
60
Hz
Picture
HDMI 1
Input
Off
FreeSync
Color
0SD
Gaming
Audio
System
HDMI 2.1
DSC
Deep Sleep
User
Mode
User
Mode
1. Press the Menu Key to open the OSD.
2. Toggle the joystick to the up or down to select System Page from the OSD. Then toggle
to the right to the function you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to choose function.
4. The Picture menu can be used to adjust the Input, Auto Source, Wide Mode, Hot Key
Assignment, DDC/CI, HDMI Black Level, Quick Start Mode, Over Clock, HDMI 2.1,
DSC, Deep Sleep.
5. Input: Select the source from HDMI1(2.1), HDMI2(2.1), DP.
6. Auto Source: The default is “On”, which can support auto search for signal source in
order.
-----------------------------------------------------------------------------------------------------------
Note:
Surround application must set Auto Source is “O󰀨”.
7. Wide mode: You can select which screen aspect you are using. The options are
Aspect, Full, 1:1 and 21:9.
8. Hot Key Assigment: Select the function of shortcut key 1(Modes, Volume,
Brightness,Gamma, Contrast, Low Blue Light, Advanced Over Drive, Advanced VRB,
and shortcut keys 2 (Modes, Volume, Brightness, Gamma, Contrast, Low Blue Light,
Advanced Over Drive, Advanced VRB).
9. DDC/CI: Allows the monitor settings to be set through the software on the PC.
-----------------------------------------------------------------------------------------------------------
Note:
• DDC/CI, short for Display Data Channel/Command Interface, which allows
monitor controls to be sent via software.
• Widget tools must setting the DDC/CI to "On" can to work properly.
10. HDMI Black level: Select to set HDMI black level.