Acer XB283K V3

English
11. Quick start mode: Select O󰀨 or On. Turn on to speed up boot speed.
12. Over Clock: The default is "O󰀨",
When Over Clock = "O󰀨", It support max resolution to 3840x2160-144
When Over Clock = "On", It support max resolution to 3840x2160-150Hz
13. HDMI2.1: The default is "On", HDMI1 (2.1) & HDMI2 (2.1) can support max resolution.
---------------------------------------------------------------------------------------------------------
Note:
HDMI 2.1 = "On" is Default
• HDMI Input can support max resolution is 3840x2160-(144/150) Hz.
• Support max resolution (Need refer to the "Over Clock").
HDMI 2.1 = "O󰀨"
• HDMI Input can support max resolution 3840x2160-60 Hz.
• Some graphics cards may not support HDMI2.1, it is recommended
to switch to HDMI2.0.
14. DSC: The default is "On", Support DP has DSC Function.
---------------------------------------------------------------------------------------------------------
Note:
DSC = "On" is Default
• Only Support DP , HDMI to be gray out and unavailable.
• Can support max resolution must refer to the "Over Clock".
DSC = "O󰀨"
• For some devices such as mobile phones, DSC needs to be set to
O󰀨 to display properly.
• Resolutions that can be supported will depend on the capabilities of
the graphics card, and may not be able to display 4K-(144/150)Hz.
• Some devices do not support DSC. If the display cannot be
displayed normally, please set DSC to O󰀨.
15. Deep Sleep: Default is on.
-----------------------------------------------------------------------------------------------------------
Note:
• When Deep Sleep is set to on and there is no signal, the monitor will enter sleep
mode, this mode can save power consumption.