Acer XB323U - Removing Stand for Wall Mount; Monitor Stand Detachment

ACER XB323U
12
S5
Assemble CTRL BD, RC and
ASSY Stand.
Assemble CTRL BD to RC and lock 2 CTRL BD screws as picture 1.
Arrange CTRL BD FFC on RC and paste adhesive as picture 2.
Insert CTRL FFC to IF BD and paste AL foil on SHD as picture 4.
Assemble RC to MF and lock RC center screw as picture 5.
Assemble stand to RC and lock 4 RC screws as picture 6.
PICTURE 1 PICTURE 2 PICTURE 3
PICTURE 4 PICTURE 5
NOTE: Circuit boards >10 cm² has been highlighted with the yellow rectangle as above image shows.
Please detach the Circuit boards and follow local regulations for disposal.