Unlock 12 PCBA screws as picture 1.
Disassemble USB BD from SHD and extract USB wire from USB BD as picture 2.
Disassemble I/F BD from SHD, extract P/BD wire and SPK wire from I/F BD, then
extract LVDS wire and USB wire from I/F BD as picture 3.
Disassemble DRV BD and extract DRV wire and DRV BD wire from DRV BD as
picture 4.
Disassemble P/BD from SHD as picture 5.
Tear off 3 pieces of adhesive tapes as picture 6.
Disassemble SPK from SHD as picture 7.
NOTE: Circuit boards >10 cm² has been highlighted with the yellow rectangle as above image shows.
Please detach the Circuit boards and follow local regulations for disposal.
To Next Page
Loading...
